← All Posts

BRISBANE FREIGHT FORWARDING SPECIALISTS

LCL Shipping: How a Shared Container Works and What You Pay in Brisbane

LCL shipping route: cartons packed into a shared container at an overseas depot, shipped to the Port of Brisbane, unpacked at a Brisbane depot and delivered

LCL shipping (less than container load) means your cartons or pallets travel in a sea container shared with other importers' goods, and you pay for the space your cargo takes rather than for the whole box. It is usually charged by the cubic metre or by the tonne, whichever is higher, plus fixed charges at each end. For a few pallets or a first order from an overseas supplier, it is often the most practical way to bring goods into Brisbane by sea.

This guide is for businesses bringing in commercial goods. It covers how the freight is worked out, what else appears on an LCL bill, what happens when the container reaches Brisbane, and the point where a full container makes more sense.

Key takeaways

  • LCL freight is usually charged per cubic metre or per 1,000 kg, whichever is greater, and many services charge a minimum of 1 cubic metre.
  • The sea freight rate is only one line. Origin charges, the Brisbane depot fees, clearance and delivery often decide the total on a small shipment.
  • Australian Border Force and biosecurity charges are per declaration, not per cubic metre, so they weigh more on a small consignment.
  • Between 1 September and 30 April, a shared container holding certain goods from a stink bug target country is managed as a whole, and if it needs treatment, nobody's cargo is unpacked until that is done.
  • Once your order would fill a good part of a 20 ft container, ask for an LCL and an FCL price side by side.

What LCL shipping means

A forwarder or consolidator books a whole container and fills it with cargo from several shippers heading the same way. Your supplier delivers the goods to a depot near the origin port, where they are packed into the shared container with everyone else's. The container sails to the Port of Brisbane, goes to a depot here (often called a container freight station), and is unpacked. Your share is then cleared and delivered to you.

Each importer's goods travel on their own house bill of lading under the consolidator's container. That is how your consignment keeps its own paperwork, clearance and delivery even though the box is shared.

The alternative is FCL (full container load), where the container is yours alone, packed at the factory and sealed until it reaches you or your depot. We quote both through our sea freight service.

How LCL freight is charged

Most LCL rates are quoted per "W/M", short for weight or measure. One W/M is usually 1 cubic metre or 1,000 kg, and you pay on whichever figure is greater. Light, bulky goods are charged on volume. Heavy, compact goods such as tiles, metal parts or stone are charged on weight.

To work out the volume, measure one carton in metres, multiply length by width by height, then multiply by the number of cartons. Pallets are measured the same way, including the pallet itself and anything that overhangs it.

Here is how that plays out on three hypothetical consignments. These are worked units, not prices.

Consignment Volume Weight Charged on
60 cartons of homewares, each 0.5 x 0.4 x 0.4 m 4.8 cubic metres 900 kg 4.8 W/M (volume is greater)
2 pallets of floor tiles, each 1.2 x 1.0 x 0.8 m 1.92 cubic metres 2,400 kg 2.4 W/M (weight is greater)
6 cartons of samples, each 0.4 x 0.3 x 0.3 m 0.22 cubic metres 40 kg 1 W/M (a common minimum)

Two habits save money here. Ask your supplier for the packed carton size and gross weight before you book, because a quote built on a guess is corrected when the goods are measured at the depot. And pack to fill cartons and pallets well, because air inside a carton is charged as freight.

What else is on an LCL bill

This is the part first-time importers often miss. The sea freight per W/M is often a modest share of the total on a small shipment. The rest comes from charges that apply at each end, and many of them have a minimum.

How an LCL bill adds up: origin charges, sea freight per cubic metre, Brisbane depot charges, border charges per declaration, delivery
  • Origin charges. Pickup from the supplier, receiving and packing at the origin depot, export paperwork and the origin terminal. Who pays these depends on the trade term on your supplier's quote.
  • Sea freight. The rate per W/M from the origin port to Brisbane, plus any fuel or seasonal surcharges the shipping line adds.
  • Brisbane depot and destination charges. Unpacking the shared container at the depot, handling, terminal and documentation fees. These are usually charged per W/M with a minimum, which is why a 1 cubic metre consignment can cost more per cubic metre than a 5 cubic metre one.
  • Border charges. For goods worth more than AUD 1,000, a full import declaration is needed, and the Australian Border Force (ABF) charges per declaration, not per cubic metre. As at 19 November 2026, an electronic import declaration costs $50 for consignments over $1,000 and under $10,000, and $152 for $10,000 or more, plus a $71 biosecurity charge for sea cargo, collected by the ABF for the Department of Agriculture, Fisheries and Forestry (DAFF). Duty and GST are on top; our customs duty and GST calculator gives you an estimate.
  • Delivery. The truck from the Brisbane depot to your door, priced by weight, pallets and whether you need a tailgate.

The useful way to compare LCL quotes is line by line. Ask each forwarder to show the origin, sea, Brisbane depot, clearance and delivery charges separately, and to say which are per W/M and which are fixed. A low per cubic metre rate with high destination charges is not a cheap quote.

Comparing LCL quotes?

Send us the supplier's quote and the carton sizes and weights. We will give you one itemised price from the supplier's door to yours, so you can see every charge before you book.

GET A FREE FREIGHT QUOTE

Or call (07) 3555 8959

How long LCL shipping takes

LCL follows the same sailings as a full container, plus a few days at each end. At origin, the goods must reach the depot before the cut-off for the container, then wait while it is packed. In Brisbane, the container has to be moved from the port to the depot and unpacked before individual consignments are released.

So plan on the sailing time plus extra days for packing and unpacking, and book early around peak periods such as the weeks before Chinese New Year, when depots and sailings fill quickly. Our guide to shipping from China to Australia gives typical sailing times from the main Chinese ports. If the goods are needed urgently, air freight is usually the better fit.

What happens when an LCL container lands in Brisbane

The paperwork starts while the ship is still at sea, so the declaration and biosecurity checks usually come before the container reaches the depot. In order:

Five steps for an LCL consignment in Brisbane: ship arrives, container to the depot, unpacked, cleared, delivered
  1. The import declaration is lodged. For goods over AUD 1,000, your customs broker lodges a full import declaration with the ABF and pays the duty, GST and charges. Our customs broker team in Brisbane can lodge it before the ship arrives.
  2. Biosecurity is assessed. DAFF checks the documents, including the packing declaration, and may direct an inspection or treatment.
  3. The container goes to the depot. The consolidator moves it from the terminal to a Brisbane depot for unpacking.
  4. Your goods are released. Once your consignment is cleared and any biosecurity direction is met, the depot releases it.
  5. Delivery. Your share is loaded and trucked to you, or collected if you prefer.

The stink bug season and shared containers

From 1 September to 30 April, Australia applies seasonal measures for the brown marmorated stink bug. Under DAFF's rules for LCL and FAK containers, a shared container holding target high risk goods shipped from a target risk country is managed at the container level before it is unpacked. Where treatment is needed on arrival, nobody's cargo comes out of that container until it has been treated. This also applies when the goods were sent through a hub in another country.

That rule matters on a shared box, because one consignment can hold up the rest. For the 2026-27 season, DAFF treats China as an emerging risk country for goods (it is on the target list for vessel surveillance only), so goods shipped from China in the season can be picked for a random onshore inspection instead of mandatory treatment. If you buy from much of continental Europe, the United States, Canada or another target risk country, we check the goods against the measures before booking and tell you whether treatment is needed.

Packing and paperwork for a shared container

Shared containers are handled more than full ones, and cargo is stacked with other people's freight.

  • Pack for stacking. Strong cartons, goods strapped and wrapped on pallets, nothing overhanging the pallet edge. Mark each carton with the consignee, carton number and total cartons.
  • Use treated or non-timber pallets. Solid timber or bamboo packaging must be ISPM 15 marked, treated before export by an approved method, or treated on arrival. Ask your supplier for ISPM 15 marked pallets, or plastic or processed wood pallets, before the goods are packed.
  • Get the packing declaration right. For LCL, DAFF's packing declaration guidance says the declaration comes from whoever packed the consignment or watched it being packed, on their letterhead with a physical address. It records any timber packaging and its treatment. Unlike a full container, an LCL declaration does not include a container cleanliness statement.
  • Send clean documents early. A commercial invoice, packing list with carton sizes and weights, the packing declaration, and any certificate of origin your free trade agreement needs. Missing or mismatched documents are a common reason a consignment sits at the depot.

Choose a trade term that fits a shared container. ICC Academy guidance from the International Chamber of Commerce says FCA suits goods handed over in containers or on pallets, while FOB is meant for port to port shipments where the seller loads the vessel. Plenty of suppliers still quote FOB for LCL, and it can work, so check which origin charges the supplier covers. Our post on CIF terms explains why a CIF quote can bring unexpected charges at the Brisbane end.

When a full container makes more sense

LCL is priced per cubic metre and FCL per box, so there is a point where a full container costs less than paying for the space in a shared one. That point moves with the route, the season and the size of the destination charges, so we do not use a fixed rule. As your order gets close to filling a good part of a 20 ft container, ask for both prices.

A full container can also be simpler when the goods are fragile, high in value or need to stay sealed, and it avoids waiting on other shippers' cargo at the depot. LCL stays the better choice for a few pallets, a trial order or a regular small top-up. Many importers use both, depending on the order. Send us the carton sizes and weights and we will price LCL and a full container side by side.

What to send us for an LCL quote

  • The supplier's name and pickup address, or the nearest port.
  • What the goods are, and the tariff code if you know it.
  • Carton or pallet sizes, the number of each, and gross weights.
  • The trade term on the supplier's quote (for example FOB, FCA or EXW).
  • When the goods will be ready, and when you need them in Brisbane.
  • Your delivery address and whether you have a forklift or dock.

We have been handling import freight and customs clearance for Brisbane businesses for over 7 years, and we will tell you plainly whether LCL, a full container or air suits the order.

Frequently asked questions

What does LCL mean in shipping?

LCL stands for less than container load. Your goods share a sea container with other importers' cargo, and you pay for the space your shipment takes up rather than for the whole container.

How is LCL calculated?

Most LCL rates are charged per W/M, which is usually 1 cubic metre or 1,000 kg, whichever is greater. Measure each carton in metres, multiply length by width by height and by the number of cartons, then compare that volume with the weight in tonnes. Many services charge a minimum of 1 cubic metre.

Why is LCL shipping so expensive for small orders?

Because much of the cost is fixed. Depot handling, documentation and delivery charges have minimums, and the ABF and biosecurity charges apply per declaration, so on a 1 or 2 cubic metre shipment they can outweigh the sea freight. Combining orders into fewer, larger consignments usually lowers the cost per carton.

Which is cheaper, LCL or FCL?

For a few pallets or a first order, LCL is usually cheaper because you pay only for your space. As the volume grows, a full container can cost less overall, and the point where that happens changes with the route and season. We can quote both for the same order so you can compare.

Do I need a customs broker for LCL freight?

For goods worth more than AUD 1,000, a full import declaration must be lodged with the ABF before release. You can lodge it yourself, but many businesses use a licensed customs broker, who also handles the biosecurity documents. We can arrange the freight and the clearance together.

This guide is general information, not legal or customs advice. Rules and charges change, so we check them against your shipment when we quote.

Ready to ship your next order LCL?

Tell us what you are bringing in, where it starts and when it will be ready. We will quote the freight, clearance and delivery to your door.

GET A FREE FREIGHT QUOTE

Or call (07) 3555 8959

CALL NOW (07) 3555 8959